ROLL-STAK Management Systems

Designed and Engineered to your specifications

The Rapistak Space Savings Advantage


Typical Roll Storage Application

  • Saving space by a more condensed storage arrangement
  • A dedicated lifting device helps to minimize forklift dependence
  • Substantially reduced aisle widths compared to a conventional forklift turning radius
  • More Rolls stored in less space for a reduced storage footprint

ROLL-STAK Single Aisle Storage System

Typical Fixed Beam Racking

  • Wooden pallets are susceptible to damage
  • Rack beams are set to specified heights
  • Fewer products can be placed on pallets
  • Wooden pallets can hold less weight
  • More air space is wasted vertically

ROLL-STAK Condensed Storage Rack

  • Rolls are mounted on cantilever arms preventing damage to the surface of the rolls.
  • Rolls can be accessed individually without unstacking other rolls
  • Less air space is wasted allowing more rolls to be stored vertically thus reducing the length of the system

ROLL-STAK Probe Handling Management Systems

Capacities up to 2,000 lbs., Rack heights from 8 ft. to 25 ft.
Minimum Roll I.D. 6", Maximum Roll Length 60"

ROLL-STAK Probe Handling Management Systems are generally appropriate in applications where high volumes of inventory are moved into and out of manufacturing operations, making more conventional forms of handling and storage less responsive and inefficient.

Typically considered an alternate to a fork-lift or other material handling approaches, ROLL-STAK Management Systems are often described as a way of saving floor space, using your overhead space and reducing building costs.  The most significant justifications for ROLL-STAK Management Systems are that they are faster and more accurate than other forms of material handling solutions because they take less space and reduce damage to inventory due to handling by fork-lift operators.

Most project planners are concerned about process stability, capital effectiveness and the elimination of non-value added costs.  Properly applied, the ROLL-STAK Management System provides a consistent, highly responsive and perfectly accurate alternative to other forms of material handling solutions.


Motorized ROLL-STAK Probe Handling Management System stores up to 474 rolls with a maximum capacity of 1700 pounds per roll.


Automated ROLL-STAK Probe Handling Management System stores more than 1500 rolls and operates 3 shifts, 7 days a week with a maximum capacity of 1000 pounds per roll.

ROLL-STAK Mandrel Handling Management Systems

Capacities up to 10,000 lbs, Rack heights from 8 ft. to 25 ft.


Cab operated semi-automated ROLL-STAK Mandrel Handling Management System stores 416 rolls with a maximum capacity of 2000 pounds per roll


Motorized ROLL-STAK Mandrel Handling Management System stores 48 rolls with maximum capacity of 4000 pounds per roll

ROLL-STAK Mandrel Handling Management Systems are designed to handle rolls, drums, or shafts up to 10,000 lbs.  Many times rolls, drums, and shafts have surfaces that cannot be touched and handling them can be a problem when using fork-lifts.  With a ROLL-STAK Mandrel Handling Management System handling and storage keeps the surface clean and free from damage.

Typically rolls, drums and shafts are stored in crates designed to support these items by there mandrels to prevent damage to the surfaces.  And many companies pile these crates on top of each other in order to save floor space.  When locating the proper roll for a roll change, fork-lift operators need to find the roll than usually unstack several crates to get to the roll they need.  After they locate the roll, they need to open the crate, wrap slings around the mandrels, then lift them out of the crate with a fork-lift.

With a ROLL-STAK Mandrel Handling Management System all of these time consuming operations are eliminated.  Unstable crate storage is no longer needed, rolls are better organized, using our system management tools rolls are easily located and the rolls can be retrieved in 2 to 3 minutes.  To transport the rolls to the production equipment, special mandrel supported carts can be supplied.  So, if you are experiencing these same issues, Contact Us and see how we can help.

ROLL-STAK Cradle Handling Management Systems

Capacities up to 6,000 lbs., Rack heights from 8 ft. to 25 ft.
Maximum Roll Length 60"


ROLL-STAK Cradle Handling Management System for wine casks allows for FIFO storage.


ROLL-STAK Cradle Handling Management Systems for oil drum storage store more drums in less space.

ROLL-STAK Cradle Handling Management Systems are designed to handle rolls and drums that can be handled on the roll or drum surface.  By storing these items in this manner more vertical space can be used reducing the amount of floor space needed.  A greater number of rolls or drums can be stored in a smaller area.  When using our system management tools rolls or drums can be located in 2 to 3 minutes compared to conventional methods.  Rolls and drums are more organized and are less susceptible to damage.  When drums or rolls need to be upended an optional upender can be placed at the end of the system to assist in this operation.  If these are the solutions you are looking for, Contact Us for a free quote.

© R a p i s t a k   C o r p,. 2017-2020