Adjustable Pallet Rack

Designed and Engineered to your specifications

MAX-RAK 246 Adjustable Pallet Rack

Capacities from 2,000 to 6,000 lbs., Rack heights from 8 ft. to 25 ft.

The MAX-RAK 246 Adjustable Pallet Rack combines the ability to store varying sizes and shapes in a densely-packed adjustable pallet rack.  The racking system uses steel fabricated pallets designed to carry a uniform distributed load of 2000, 4000, or 6000 lbs (907, 1814, 2721 kg).  Because the rack system is instantly adjustable there is no need for rack beams set to specific heights.  As your space requirements change the storage configurations will change with your inventory needs.  This will allow you to eliminate wasted air space and to increase storage capacity in the same cubic space.

MAX-RAK 246 Adjustable Pallet Rack Features

  • Removable and instantly adjustable steel fabricated pallets instead of fixed beam shelving
  • Increased storage density with no wasted space.
  • Average rack heights starting at 10 ft. (3.04m) to 24 ft. (7.32m)
  • Various pallet sizes are available; 30x30, 36x30, 36x36, 42x36, 42x42, and 48x48 (761x762, 914x762, 914x914, 1067x914, 1067x1067, 1219x1219, and 1321x1219)
  • Pallets are equipped with full length fork pockets to prevent tipping of pallets when pallets are side loaded.
  • The 2k and 4k racks are rated at 25,000 lbs. per section (11,340 kg) and the 6k racks are rated 36,000 lbs. per section (16,329 kg)
  • The racking can be easily expanded so as your needs grow the system can grow with you


Positive locking pallet tabs help guide the pallets into place and the locking action allows for a safe and secure pallet.


Smooth front uprights with 1/2" high strength support pins helps eliminate damage to the pins since nothing protrudes from the face of the upright.


Each section is fully braced at the top and along the back of each section with top and rear X-brace panels. This design creates a very strong and stable rack section.

MAX-RAK 246 Adjustable Pallet Rack Accessories

Capacities from 2,000 to 6,000 lbs., Rack heights from 8 ft. to 25 ft.

Starter Section
The Starter Section includes two uprights, rear panel X-bracing, one top panel X-bracing, shims, and hardware.

On rack heights greater than 17 ft. (5.18m) one mid-panel X-brace is included.

On rack heights greater than 22ft. (6.7m) two mid-panel X-braces are included.

Model No: (eg. 2KMRS-Height-Width-Depth)
2KMRS-XXX-XXX-XX     2,000 lb. (907 kg) Capacity Unit
4KMRS-XXX-XXX-XX     4,000 lb. (1814 kg) Capacity Unit
6KMRS-XXX-XXX-XX     6,000 lb. (2721 kg) Capacity Unit

Add-On Section
The Add-On Section includes one upright, rear X-bracing, one top panel X-Bracing shims and hardware.

On rack heights greater than 17 ft. (5.18m) mid-panel X-brace is included.

On rack heights greater than 22 ft. (6.7m) two mid-panel X-braces are included.

Model No: (eg. 2KMRS-Height-Width-Depth)
2KMRA-XXX-XXX-XX     2,000 lb. (907 kg) Capacity Unit
4KMRA-XXX-XXX-XX     4,000 lb. (1814 kg) Capacity Unit
6KMRA-XXX-XXX-XX     6,000 lb. (2721 kg) Capacity Unit

Pallet Options

Standard Pallet Sizes
30" W x 30" D
36" W x 30" D
36" W x 36" D
42" W x 36" D
42" W x 42" D
48" W x 48" D
52" W x 48" D

Flow-Thru Feature
Safety feature to allow sprinkler system water to flow-thru the pallet.

Tub Kit Feature
Provides walls on all four sides of the pallet and comes in 4", 8" or 12" heights.

Tub Kit w/ Drop Down Front
Allows you to add or remove items without having to pick them up over the sides.

Tub Kit Partition Feature
Allows you to partition a pallet into two, three, four or more sections.

Tub Kit Divider Feature
Allows you to divide the partitions into two, three, four or more sections.

1 1/2" Back Lip Feature
Used to prevent loads from sliding off the back of the pallet.

Cable Reel Feature
Fully adjustable allows cables to be pulled directly off the pallet.

Other pallet features are available, contact the factory for more information.

© R a p i s t a k   C o r p,. 2017-2020